This website uses cookies to improve your experience. We\'ll assume you\'re ok with this, but you can opt-out if you wish. Read More
Follow Us:
Follow Us:
LICENSED OFFICE FURNITURE INSTALLERS • CSLB C61/D34 • SAN FRANCISCO
Office furniture installers from CG Moving Company, Inc. handle the disassembly, transport, and reinstallation of cubicle panels, benching systems, height-adjustable workstations, panel systems, and private office furniture across San Francisco and the Bay Area. The company holds CSLB C61/D34 license no. 987530, required under California law for systems furniture installation above the minor-work threshold. CG Moving Company operates as both a licensed mover under CPUC MTR 0190922 and a licensed contractor, covering the move and the furniture installation under one contract.
Licensed furniture installer
CA intrastate mover
For building management
Federal authority
Move and installation
Monday to Friday, 8am to 5pm Pacific. After-hours and weekend installations available.
CG Moving handles office and commercial moves across the Bay Area. Free survey.
CG Moving Company provides office furniture installation services covering the complete cycle of a systems furniture project: inventory and documentation at origin, disassembly and labeling, protected transport, and licensed reinstallation at the destination. The company handles cubicle panels, benching systems, sit-stand and height-adjustable workstations, overhead storage components, private office furniture systems, and accessories.
In California, reinstallation of prefabricated modular furniture above the minor-work threshold is licensed contractor work under CSLB classification C61/D34. Most office movers in San Francisco do not hold this license. Without it, a mover can transport furniture but cannot legally perform reinstallation at the destination. CG Moving Company holds CSLB C61/D34 license no. 987530 and is a single vendor for the office move and the furniture installation, removing the handoff at the most time-critical point in the project.
Single-office and single-floor relocations for businesses of any size across San Francisco. For enterprise-scale multi-phase moves, corporate relocation services on this page apply.
Short and long-term storage at the South San Francisco warehouse for surplus panels, components, and office furniture during phased installations.
Workstations, servers, and network equipment moves coordinated with the client's IT team. Surplus IT assets can move directly into commercial storage after the move.
Commercial Moving Services The full commercial moving hub covering office, lab, warehouse, data center, government, and other project types across San Francisco and the Bay Area.
CG Moving handles office and commercial moves across the Bay Area. Free survey.
Modular and systems furniture projects vary by furniture brand, system type, panel configuration, and building access. CG Moving Company installs the following office furniture systems across San Francisco and the Bay Area.
Full-height and partial-height cubicle panel systems including panel-mounted work surfaces, transaction tops, and privacy screens. Cubicle installations require accurate configuration drawings and labeled components before disassembly to enable correct reinstallation at the destination.
Linear and back-to-back benching systems, shared work surfaces, cable management trays, and monitor arms. Open-plan benching is common in technology offices and requires coordination with power and data rough-in at the destination.
Electrically height-adjustable frames, sit-stand bases, and motorized work surfaces. These require careful electrical connection coordination and should not be transported in a raised position.
Overhead storage cabinets, lateral files, mobile pedestals, and panel-hung filing components. All storage components are inventoried and labeled as part of the disassembly documentation.
Executive desk systems, credenzas, return units, and storage combinations for private offices. These typically have fewer components than open-plan systems but require precise configuration drawings at the destination.
Modular conference tables, training tables, and multi-position table systems with power and data modules, requiring coordination with building infrastructure at the destination.
CG Moving handles every step: pre-move survey, COI, loading, and placement at destination.
CG Moving Company uses written configuration drawings, component-level labeling, protected transport, and CSLB-licensed reinstallation to manage modular furniture projects from documentation through final placement and punch list.
A site visit documents the existing furniture layout: panel configurations, component inventory, connector and tile details, and hardware that needs replacing. Configuration drawings are produced before disassembly begins. This is the step most movers without installer experience skip, and the one that causes the most problems at destination.
Each panel, work surface, overhead unit, and accessory is labeled to its destination position before disassembly. Connectors, hardware, and small parts are bagged and labeled by workstation. Panels are padded and wrapped for transport. Nothing goes into a box without a destination label.
Office furniture panels, glass components, and work surfaces are transported in padded moving vans. Fragile glass and lacquered surfaces receive double protection. COI is issued, elevator and dock windows are reserved, and building access requirements are confirmed before transport begins.
Panels are assembled in configuration sequence at the destination. Work surfaces, overhead units, and accessories are installed and leveled. A punch list closes the installation. Missing or damaged components are documented for follow-up. Under CSLB C61/D34 license no. 987530, the company performs reinstallation as a licensed contractor.
Modular furniture installation costs depend on system type, workstation count, and configuration.
Office furniture installation costs depend on the type and volume of systems furniture, the condition of existing documentation, access constraints at origin and destination, and whether the project involves transport or installation only.
Panel count, workstation count, furniture brand, and configuration complexity. A benching system installs faster than a full-height cubicle field with integrated overhead storage.
Freight elevator windows, dock hours, building COI requirements, and whether the work runs after hours or on weekends in San Francisco. Multi-phase installations span multiple sessions.
Projects with accurate as-built drawings install faster than those where documentation is missing. Deinstallation-only, installation-only, and full move-and-install are scoped differently.
Common factors that affect an office furniture installation estimate:
Panel count, workstation count, and furniture system type (cubicle, benching, private office, or conference)
Whether existing configuration drawings are available or need to be produced at survey
Freight elevator windows and building access hours in San Francisco and the Bay Area
COI requirements: additional insured wording and waiver of subrogation clauses for the building
After-hours or weekend scheduling and the number of installation sessions required
Whether the project is deinstallation only, installation only, or a full move-and-reinstall
CG Moving Company reviews furniture type, configuration, access, and documentation before preparing a written estimate. Projects are priced on a flat or hourly rate specific to the scope. No charges are added after the estimate is signed.
Call 888-508-7838 or submit a project inquiry at
CG Moving handles office and commercial moves across the Bay Area. Free survey.
CG Moving Company, Inc. holds CSLB C61/D34 license no. 987530 for modular furniture installation in California, verifiable at cslb.ca.gov. The company has provided office furniture removal services, installation, and combined move-and-install projects across San Francisco, the Peninsula, and the Bay Area since 2005. It holds CPUC MTR 0190922, USDOT 3907428, and is City and County of San Francisco approved vendor no. 96965.
C61/D34 No. 987530
Verify at cslb.ca.gov
Founded 2005
Charlie Gonzalez, founder
GS-33F-0063X
CAGE 4PAJ1 | SAM.gov
No. 96965
City and County of San Francisco
CPUC MTR 0190922
USDOT 3907428
USDOT 3907428
MC 1441357
CG Moving handles office and commercial moves across the Bay Area. Free survey.
Tell us the furniture system type, approximate workstation or panel count, origin address, destination address, and any access constraints at either building. A surveyor will confirm scope, review existing configuration drawings, and schedule the on-site visit.
CG Moving Company handles COI issuance within one business day, elevator and dock reservation, street permit filing, and after-hours scheduling as part of the furniture installation project scope. The company holds CSLB C61/D34 license no. 987530 and is the single vendor for transport and reinstallation.
Free survey for office furniture installation across San Francisco and the Bay Area
CG Moving handles office and commercial moves across the Bay Area. Free survey.
CG Moving Company provides office furniture installation services for businesses across San Francisco, the Peninsula, Silicon Valley, the East Bay, and Marin County, operating from the South San Francisco yard at 1755 Mission Rd.
San Francisco
CSLB-licensed office furniture installation in downtown SF, SoMa, the Financial District, Mission Bay, and across all San Francisco neighborhoods. COI issued within one business day.
Peninsula / San Mateo County
Office furniture installation for South San Francisco, San Mateo, Redwood City, Burlingame, and the wider Peninsula. The yard at 1755 Mission Rd is inside the Peninsula, keeping travel time short.
Silicon Valley
Cubicle, benching, and workstation installation for San Jose, Palo Alto, Mountain View, Sunnyvale, and Santa Clara technology and corporate offices.
East Bay
Office furniture installation for Oakland, Berkeley, Alameda, and Contra Costa County businesses. Corporate, law firm, and professional services office installations.
Marin County / North Bay
Office furniture installation for San Rafael, Mill Valley, Novato, and Marin County professional services and corporate offices with flexible scheduling.
Common questions about CG Moving services, licensing, COI, and costs answered below.
Modular furniture installation covers the assembly of prefabricated, interconnecting office furniture systems including cubicle panels, benching frames, work surfaces, overhead storage, and accessories. California law treats installation of these systems above the minor-work threshold as licensed contractor work requiring a CSLB C61/D34 license.
Yes. Installation of prefabricated modular office furniture above the minor-work threshold requires a California Contractors State License Board (CSLB) license under classification C61/D34. CG Moving Company holds CSLB C61/D34 license no. 987530. Verify the license at cslb.ca.gov before booking any contractor for this work.
Office furniture installation projects are priced on a flat or hourly rate specific to the scope. A surveyor reviews the furniture system type, panel or workstation count, configuration drawings, and access at both locations before preparing the estimate. The estimate states the rate, scope, and all additional charges before any work begins.
Yes. Deinstallation-only projects are available for offices being cleared, downsized, or handed back to a landlord. The company can disassemble, catalog, and move systems furniture to storage at the South San Francisco warehouse or to a new location as a separate scope from reinstallation.
Yes. Most office furniture installations in San Francisco run after hours or on weekends to avoid disrupting business operations. Freight elevator and dock window availability often determines the scheduling constraint, not crew availability.
Yes. Send the building’s exact additional insured wording and waiver of subrogation requirements. The insurance agent issues the certificate within one business day. Most commercial buildings in San Francisco require one before releasing the freight elevator for any contractor work.
The company works with all major systems furniture brands including Herman Miller, Steelcase, Haworth, Knoll, Kimball, HON, and others. Specific configuration requirements for proprietary systems are reviewed at survey. The company does not supply new furniture; it installs and relocates existing systems.
The office moving page (/commercial-moving-san-francisco/office-moving/) covers full office relocations including workstation teardown, IT disconnect, and all phases of a move. This page covers modular furniture installation specifically: the CSLB-licensed assembly and disassembly of systems furniture as a standalone service or as part of a broader office relocation.
Call 888-508-7838 to book a free move survey. Written estimate before your move date.
Whether you need office furniture removal services, a full move-and-reinstall, or installation-only for a new office space in San Francisco or the Bay Area, CG Moving Company handles the project under CSLB C61/D34 license no. 987530 as a licensed California contractor and mover.
The company holds California intrastate authority CPUC MTR 0190922, City and County of San Francisco approved vendor no. 96965, and GSA Schedule GS-33F-0063X. CSLB C61/D34 license no. 987530 is verifiable at cslb.ca.gov. Every project starts with a free on-site survey and a written estimate.
Licensed office furniture installers across San Francisco, the Peninsula, Silicon Valley, and the East Bay
CG Moving Company, Inc.
1755 Mission Rd, South San Francisco, CA 94080
Phone: 888-508-7838
CPUC MTR 0190922 | USDOT 3907428 | CSLB C61/D34 No. 987530 | GSA GS-33F-0063X
Monday to Friday, 8am to 5pm Pacific. After-hours and weekend installations scheduled on request.